Screw air compressors
Rotary screw air compressors for plants that need a continuous, steady supply of air.
When is a screw compressor the right choice?
A screw compressor suits plants that need a steady supply of air for many hours a day. It runs continuously without the duty-cycle limits of a piston machine.

- 7.5–37kWCKPM motor power
- 40–218CFMCKPM air delivery @ 8 bar
- 16kg/cm²XLAM-L laser packages
How a screw compressor works.
Two meshing screw rotors, a male and a female, turn inside a close-fitting casing. The air between their lobes is carried along and squeezed into a smaller and smaller space.
- 01
Suction
Air is drawn in through the inlet into the open spaces between the rotor lobes.
- 02
Compression
As the rotors turn, the space holding the air moves along the rotors and gets smaller, so the air is squeezed.
- 03
Discharge
At the far end the space opens to the outlet and the compressed air flows out, steadily and without pulses.
Overview
A screw compressor delivers air continuously, for long running hours. Boss supplies the CKPM permanent-magnet variable-speed series, XLAM-L 16 bar packages for fiber laser cutting, and screw packages that combine compressor, air dryer and receiver.
Continuous duty
Steady air for long running hours, without the duty-cycle limits of a piston machine.
Speed follows demand
On the CKPM series, variable-speed control matches motor speed to the air the plant uses.
Direct drive
The motor drives the airend directly on the CKPM series: no belts or gears.
Supplied as a package
Compressor, air dryer and receiver can be supplied together, so air leaves the package treated and stored.
Technology
- Permanent-magnet motor. Drives the airend on every CKPM model.
- Variable-speed drive. Adjusts motor speed to demand.
- Two-stage oil separation. Centrifugal separation, then a separator element.
- PLC controller. Online pressure, temperature and current readings with maintenance indications.
Technology details apply to the CKPM series.
- VFDSets motor speed to the air demand.
- PM MOTORPermanent-magnet motor.
- DIRECT DRIVEThe motor shaft drives the airend directly: no belts or gearbox.
- TWIN-SCREW AIRENDMale and female rotors turn in opposite directions and compress the air.
- AIR OUTCompressed air leaves at the discharge.
Applications
Where this range is used.
- Manufacturing lines
- Fiber laser cutting
- Textile
- Automobile
- Pharmaceutical
- Food & beverage
- Packaging
- Chemical processing
In the range

Screw compressor package

CKPM-series screw compressor
Technical specifications
As published in Boss catalogues. Choose a model to see its full sheet where available.
- CKPM-10A40 CFM · 10 HP
- CKPM-15A60 CFM · 15 HP
- CKPM-20A83 CFM · 20 HP
- CKPM-25A100 CFM · 25 HP
- CKPM-30A125 CFM · 30 HP
- CKPM-40A166 CFM · 40 HP
- CKPM-50A218 CFM · 50 HP
- XLAM-20L50 CFM · 16 kg/cm²
- XLAM-30L85 CFM · 16 kg/cm²
- XLAM-50L130 CFM · 16 kg/cm²
CKPM series: permanent-magnet variable-speed, 10 to 50 HP
| Model | Motor power | Max pressure | Air delivery @ 8 bar | Noise | Outlet connection | Weight | Dimensions L×W×H |
|---|---|---|---|---|---|---|---|
| CKPM-10A | 7.5 kW / 10 HP | 10 bar / 145 psi | 40 CFM | 62 ±2 dB(A) | G3/4" | 135 kg | 780×560×915 mm |
| CKPM-15A | 11 kW / 15 HP | 10 bar / 145 psi | 60 CFM | 63 ±2 dB(A) | G3/4" | 205 kg | 1000×640×1095 mm |
| CKPM-20A | 15 kW / 20 HP | 10 bar / 145 psi | 83 CFM | 63 ±2 dB(A) | G3/4" | 230 kg | 1000×700×1095 mm |
| CKPM-25A | 18.5 kW / 25 HP | 10 bar / 145 psi | 100 CFM | 65 ±2 dB(A) | G1 1/4" | 280 kg | 1000×750×1170 mm |
| CKPM-30A | 22 kW / 30 HP | 10 bar / 145 psi | 125 CFM | 65 ±2 dB(A) | G1 1/4" | 280 kg | 1000×750×1170 mm |
| CKPM-40A | 30 kW / 40 HP | 10 bar / 145 psi | 166 CFM | 65 ±2 dB(A) | G1 1/2" | 468 kg | 1150×900×1360 mm |
| CKPM-50A | 37 kW / 50 HP | 10 bar / 145 psi | 218 CFM | 65 ±2 dB(A) | G1 1/2" | 468 kg | 1150×900×1360 mm |
Source: Boss catalogue. Confirm the specification with the Boss team for your application.
XLAM-L packages for fiber laser cutting, 16 bar
| Model | Air delivery | Pressure | Air receiver | Refrigerated air dryer |
|---|---|---|---|---|
| XLAM-20L | 50 CFM | 16 kg/cm² | 500 L | 60 CFM |
| XLAM-30L | 85 CFM | 16 kg/cm² | 500 L | 100 CFM |
| XLAM-50L | 130 CFM | 16 kg/cm² | 1000 L | 150 CFM |
Source: Boss catalogue. Confirm the specification with the Boss team for your application.
Related products
The rest of the system around this range.
Questions
Short answers about screw air compressors.
What is included in a Boss screw compressor package?
The package combines the screw compressor with an air dryer and an air receiver, so the air leaves the package treated and stored.
What is a screw air compressor?
A screw air compressor compresses air between two meshing helical rotors, a male and a female rotor. It delivers a continuous, steady flow of air and suits plants that need compressed air for many hours a day.
What is the difference between fixed-speed and VFD screw compressors?
A fixed-speed screw compressor runs its motor at one speed and matches demand by loading and unloading. A VFD (variable-frequency drive) compressor changes motor speed to follow the air the plant uses, which keeps delivery pressure steadier when demand varies. The Boss CKPM series pairs a permanent-magnet motor with VFD control.
How do I get a price for screw air compressors?
Send your application, required air flow and working pressure through the quote form. The Boss team replies with a matching machine and price.
Plan your screw with Boss.
Share your application, required air flow and working pressure. A Boss compressed-air specialist replies with the right system.







