Get a quote

Questions buyers ask.

Short, direct answers about compressed air. For your plant’s numbers, use the CFM guide or ask the Boss team.

Choosing a compressor

What is the difference between screw and reciprocating air compressors?

A screw compressor uses two rotating screws and suits continuous, all-day demand. A reciprocating compressor uses a piston and suits intermittent demand, such as workshops.

How do I choose the right air compressor size?

Add up the air flow of every tool and machine that runs at the same time, at the pressure they need. Choose a compressor that delivers that flow at that pressure, with some margin for growth.

How is compressor CFM calculated?

Add the air consumption, in CFM, of every tool and machine that runs at the same time, at its working pressure. Add a margin for leaks and future growth, then choose a compressor whose free air delivery (FAD) meets that total at your pressure. One CFM is about 28.3 litres per minute.

What is the difference between displacement and free air delivery (FAD)?

Displacement is the volume the compressor sweeps. Free air delivery is the air it actually delivers at the outlet, and it is always lower. Size a compressor on FAD.

Single-stage or two-stage: which do I need?

A single-stage compressor compresses air in one stroke and suits lower working pressures. A two-stage compressor compresses it twice, with cooling in between, for higher pressures.

Air treatment

Why do I need an air dryer and filters?

Compressed air carries moisture, oil and particles. A dryer and filters remove them so pipes, tools and products stay clean and last longer.

What does a pressure dew point of +3 °C mean?

It is the temperature at which water would condense out of the compressed air at its working pressure. A refrigerated dryer at a +3 °C pressure dew point keeps water from condensing in pipes that stay above that temperature.

Which compressed-air filters does a plant need?

Most systems use a general-purpose particulate filter followed by a finer coalescing filter. Food, pharma and painting add an activated-carbon stage for oil vapour.

Systems and high pressure

What goes into a complete compressed-air system?

A compressor, a dryer and filters for air treatment, an air receiver for storage, and the piping that carries air to each point of use.

What does an air receiver do?

It stores compressed air, absorbs pressure swings when demand changes, and lets the compressor run in fewer, longer cycles.

What counts as high-pressure compressed air?

Most plant air runs at about 7 to 10 bar. High-pressure compressors deliver air well above that, for applications such as PET bottle blowing and testing.

About Boss

Where is Boss Air Compressor based?

Boss Air Compressor is based in Kalher, Bhiwandi, in Thane district, Maharashtra.

How often does a Boss PM screw compressor need service?

The first service is due at 2,500 hours, covering oil, oil filter and air filter. After that, service is due every 4,000 hours.

Tell us what your plant needs.

Share your application, required air flow and working pressure. A Boss compressed-air specialist replies with the right system.

Get a quote
Find a compressor Get a quote